Tempress Technologies

News, Events and Video

Case History: SC-HydroPull Stimulation & Cleaning Tool

New record extended reach fill cleanout with coiled tubing – 10,600 foot horizontalAugust 28, 2013 | by JK Admin

Two shallow, extended reach wells on the North Slope of Alaska required fill cleanouts.   The TVD of the first well was 3800 feet with a measured depth of 14,400 feet for a total  horizontal extent of 10,600 feet.   The horizontal extent of the second...


Read More »

Case History: HydroPull

New record extended reach CPB millout – 9260 foot horizontalAugust 16, 2013 | by JK Admin

The customer needed to mill out five composite bridge plugs in the toe of a long horizontal Marcellus Shale.  The well casing was 5-1/2 inch with a vertical depth of 7720 feet and measured depth of 16,982 feet.   This job was completed on 2...


Read More »

Case History: HydroPull

Eliminate Use of Friction-Reducing Beads in the Marcellus ShaleMay 16, 2013 | by Admin

These jobs required milling bridge plugs in 5000 to 6000 ft (1524 to 1829 m) horizontal 5.5-in. (140-mm) casing to 11,700 to 12,000 ft (3566 to 3658 m) MD. Prior to this work, the operator had been specifying friction-reducing beads and chemicals. The wells are...


Read More »

Case History: Acoustic Tools

VibraFlow™April 17, 2013 | by Admin

Fluid-powered, high-intensity well stimulation tool. The VibraFlow™ turbo-acoustic source converts hydraulic power into a powerful high frequency acoustic signal. This powerful source mobilizes fines in the formation near the wellbore and increases acid and chemical reaction rates in the formation near the wellbore. The primary...


Read More »

Case History: Acoustic Tools

NitroBlast™April 17, 2013 | by Admin

High-Intensity Gas-Powered Acoustic Well Stimulation Tool. The NitroBlast™ tool creates high-power (up to 75 kW) sound at 2-20 kHz. Large diameter acoustic reflectors focus the sound on the formation. The tool is gas-driven to keep the well underbalanced during treatment....


Read More »

Case History: JetRotor™

Acid BlastingApril 17, 2013 | by Admin

The JetRotor™ is acid capable and is commonly used as part of an acidizing stimulation. In this application a stimulation head is run to blast the wellbore while squeezing acid into the well. The tool accommodates high flow rates and pressures for acid squeeze stimulations....


Read More »

Case History: JetRotor™

Cement MillingApril 17, 2013 | by Admin

In this remedial job the customer needed to remove cement from 12525 to 13590 feet of 3-1/2” casing.  A motor and 2-7/8-inch mill were used to drill out the cement leaving a sheath of cement.  A 2-1/8” JetRotor™ was run with XL jets to remove...


Read More »

Case History: JetRotor™

Milling HeadApril 17, 2013 | by Admin

Hydraulic energy is focused forward. The core region of the jets provides 100% coverage of the front of the tool to mill through bridged material. – Removes soft mineral scale, barite sag, paraffin, hard-packed sand and other well obstructions, A high-pressure (HP) milling tool is available...


Read More »

Case History: JetRotor™

Stimulation and screen cleaning headApril 17, 2013 | by Admin

Two large radial jets, one small forward jet. Cleaning and Stimulation Head Remove drilling damage from openhole completions, Clean screens and perforations, Acid blast for uniform acid delivery during acid squeeze and Multistage foam diversion acid squeeze....


Read More »

Case History: Motor Gas Separator (MGS™)

Water Bypass Sub (WBS™)April 17, 2013 | by Admin

This simple tool incorporates two bypass ports for applications where extra flow is required but gas will not be run. Software provided with this tool allows the user to size the bypass ports for the desired excess flow above the motor and to evaluate how...


Read More »