Tempress Technologies

Case Histories

Case History: HydroPull Effectiveness

Demonstrated Hydropull Effectiveness

February 5, 2015

Case History, McMullen County, TX Casing 5 ½” 23 lb PBTD 15,473’ 2” Coil Tubing 23 8K plugs plus 1 Kill Plug We received this report from the field, once again demonstrating the effectiveness of the HydroPull, saving time and money to our customers. “Our competition...


Read More »

3-well Case Study, Atascosa County, Texas

Milling plugs left in the well by the competition

September 3, 2014

Casing 5 ½” 23 lb. PBTD – 15,621′ 2” CT Unit 29 8K plugs Our competition was on the well and unable to reach bottom with their downhole coil agitation tool. They had friction lock up at 14,315’ while pumping 10bbl ultra-lube slugs (2.5 gal...


Read More »

Case History: SC-HydroPull Stimulation & Cleaning Tool

New record extended reach fill cleanout with coiled tubing – 10,600 foot horizontal

August 28, 2013

Two shallow, extended reach wells on the North Slope of Alaska required fill cleanouts.   The TVD of the first well was 3800 feet with a measured depth of 14,400 feet for a total  horizontal extent of 10,600 feet.   The horizontal extent of the second...


Read More »

Case History: HydroPull

New record extended reach CPB millout – 9260 foot horizontal

August 16, 2013

The customer needed to mill out five composite bridge plugs in the toe of a long horizontal Marcellus Shale.  The well casing was 5-1/2 inch with a vertical depth of 7720 feet and measured depth of 16,982 feet.   This job was completed on 2...


Read More »

Case History: HydroPull

Eliminate Use of Friction-Reducing Beads in the Marcellus Shale

May 16, 2013

These jobs required milling bridge plugs in 5000 to 6000 ft (1524 to 1829 m) horizontal 5.5-in. (140-mm) casing to 11,700 to 12,000 ft (3566 to 3658 m) MD. Prior to this work, the operator had been specifying friction-reducing beads and chemicals. The wells are...


Read More »

Case History: Acoustic Tools

VibraFlow™

April 17, 2013

Fluid-powered, high-intensity well stimulation tool. The VibraFlow™ turbo-acoustic source converts hydraulic power into a powerful high frequency acoustic signal. This powerful source mobilizes fines in the formation near the wellbore and increases acid and chemical reaction rates in the formation near the wellbore. The primary...


Read More »

Case History: Acoustic Tools

NitroBlast™

April 17, 2013

High-Intensity Gas-Powered Acoustic Well Stimulation Tool. The NitroBlast™ tool creates high-power (up to 75 kW) sound at 2-20 kHz. Large diameter acoustic reflectors focus the sound on the formation. The tool is gas-driven to keep the well underbalanced during treatment....


Read More »

Case History: JetRotor™

Acid Blasting

April 17, 2013

The JetRotor™ is acid capable and is commonly used as part of an acidizing stimulation. In this application a stimulation head is run to blast the wellbore while squeezing acid into the well. The tool accommodates high flow rates and pressures for acid squeeze stimulations....


Read More »

Case History: JetRotor™

Cement Milling

April 17, 2013

In this remedial job the customer needed to remove cement from 12525 to 13590 feet of 3-1/2” casing.  A motor and 2-7/8-inch mill were used to drill out the cement leaving a sheath of cement.  A 2-1/8” JetRotor™ was run with XL jets to remove...


Read More »

Case History: JetRotor™

Milling Head

April 17, 2013

Hydraulic energy is focused forward. The core region of the jets provides 100% coverage of the front of the tool to mill through bridged material. – Removes soft mineral scale, barite sag, paraffin, hard-packed sand and other well obstructions, A high-pressure (HP) milling tool is available...


Read More »